This post was most recently updated on February 10th, 2022
- 1 Best Gimbal For Sony A6600
- 1.1 1.DJI Ronin-SC Pro Combo – Camera Stabilizer
- 1.2 2.DJI RS 2 – 3-Axis Gimbal Stabilizer for DSLR and Mirrorless Camera Sony
- 1.3 3.DJI RSC 2 – 3-Axis Gimbal Stabilizer for DSLR and Mirrorless Camera, Nikon, Sony
- 1.4 4.Zhiyun Weebill S [Official] 3-Axis Gimbal Stabilizer
- 1.5 5.Hohem iSteady Multi 3-Axis Gimbal Stabilizer for Sony RX100 Series, Sony RX0, Sony X3000
- 1.6 6.Zeadio Camera Smartphone Stabilizer
- 1.7 7.zhi yun Weebill S 3-Axis Gimbal for Mirrorless and DSLR Cameras Like Sony A7M3
- 1.8 8.Newmowa Mini Shooting Grip vlog Camera Grip for Sony Vlogger
- 1.9 9.DJI Ronin-SC Handheld 3-Axis Gimbal Stabilizer for Sony
- 1.10 10.DJI Ronin-SC Handheld 3-Axis Gimbal Stabilizer
Best Gimbal For Sony A6600
Have you ever experienced shooting without a tripod? It’s not easy to get a steady shot, is it? That’s why a tripod is often considered one of the most essential accessories for any photographer.
Tripods are known as supports that provide stability to cameras and other photographic equipment when shooting landscapes, portraits, and other photos in low light. Tripods allow you to take sharp pictures in any shooting conditions. Choosing the best camera tripod for your Sony a6600 is important.
Tripods are usually made of aluminium alloy, carbon fibre and wood. Carbon fibre tripods are lightweight but can be very expensive. Wood tripods are sturdy but also heavy.
Aluminium alloy tripods are usually less expensive than carbon fibre or wood tripods but they can easily be dented or scratched. The best camera tripod for sony a6600 will depend on your preferences and budget.
The Ronin-SC Pro is a high-end stabilizer designed for mirrorless digital cameras. It has been rigorously tested to support up to 2 kg (4.4 lbs) while still achieving a smooth, cinematic shot.
The Ronin-SC Pro has an improved design over the original Ronin-S and Ronin-M—it’s 30% larger and more ergonomic, so it’s easier to use and its arms fold in for easy storage. The arm locks on the Ronin-SC Pro have also been redesigned so they’re easier to open and close than before.
The Ronin app lets you adjust the camera position using a real-time optimization algorithm based on gyroscope data from the camera and gimbal, so you can capture perfect shots with just your smartphone or tablet.
There are two ways to control the Ronin-SC Pro: You can use the app or a joystick on the handlebar. The app features presets for Panorama, Time Lapse, Motionlapse, Motion Control, and ActiveTrack 3.0, which allows you to shoot complex tracking shots with ease.
Axis locks on each arm allow for faster storage and individual axis balancing. The Quick Release Plate includes a positioning block that you.
DJI Ronin-S 2-Axis Gimbal Stabilizer for DSLR and Mirrorless Camera is designed to capture smooth, stable footage in any situation.
The Ronin-S uses balanced three-axis motors to counter the force of gravity for incredible stabilization, giving you the confidence to explore new filmmaking possibilities.
The Ronin-S has a maximum payload of 2.3 lbs, making it ideal for mirrorless cameras and other professional gear. It also has a built in 1.4″ full color touchscreen, saving you from the hassle of connecting an external monitor.
As you set up the Ronin-S, you can use DJI’s mobile app to activate ActiveTrack 3.0 and FaceTrack features, allowing you to track moving objects and control your camera without a remote control.*
Mount the Ronin-S on a car or even on your body for dynamic, first person camera shots that are impossible with traditional camera stabilizers.**
Ronin is compatible with a growing number of third party accessories from companies such as Kessler Crane and Vitec RDF Pro Tools.
DJI RSC 2 is the most advanced and easy to use camera stabilizer for DSLR and mirrorless cameras in its class. It features an upgraded gimbal, larger motors, higher payload, and a customizable dual-layer camera mounting plate that supports popular brands. The compact and foldable design makes it easy to transport, while the 1-inch built-in display allows you full control over the camera.
Features:Compact and foldable design: Travel light with your gear with the foldable design of the RSC 2. When folded, it is smaller than a sheet of A5 paper, making it as portable as it is powerful.
1″ OLED screen: A 1-inch built-in OLED screen gives you complete control right at your fingertips!
Improved Titan Autonomous Stabilization Algorithm: Capture smoother footage than ever with DJI’s Titan Autonomous Stabilization Algorithm. It compensates for minor movements to provide ultra-smooth footage, even when you’re shooting from afar or using zoom lenses.
Quick switch to portrait mode: The Manfrotto + Arca dual-layer camera mounting plate provides compatibility with popular brands.* Switch to portrait mode with just a tap in order to bring professional-grade footage.
The Weebill S is the smallest and lightest three-axis handheld gimbal released by Zhiyun to date. It is designed for mirrorless cameras and compact camcorders, like the Canon EOS M50, Panasonic GH5, Sony A7 series, and the BMPCC 4K.
It features a newly designed quick release system that allows users to switch setups quickly and easily, as well as dual focus control which allows you to adjust both focus and zoom from the handgrip, or from a mobile device when paired with the optional TransMount Image Transmission Module. The Weebill S also features an OLED display on the side of the gimbal which can be used to monitor battery life, gimbal mode, and more.
I purchased the Hohem iSteady after much research on different gimbals. I wanted it to be compatible with my Sony a6300, so I decided to get this one. The first thing that attracted me was the price: at 280 dollars (including the charger and 2 batteries), it is quite an affordable gimbal for someone trying to get into videography.
In terms of design and durability, it kind of reminds me of a Nintendo Wii controller. It’s very light, weighing only about 900g, so it’s not going to weigh down your camera too much, although I still suggest getting a shoulder strap if you decide to carry your stabilizer in that way.
The steady has a lot of modes: pan follow, 3D mode (all follow), all lock mode, as well as follow me mode and panning mode (both vertical and horizontal).
While these modes are very useful in their own right, they are not without their flaws. For example, all lock mode allows you to concentrate on one particular angle while the rest of the gimbal follows your movements; however, there is no way to control the tilt angle. This can be problematic if you want to get a low-angle shot since you don’t want to be.
Stabilizers are used to reduce the effects of shaky hands. These systems are especially helpful when recording video while walking or running, which can otherwise cause the camera to bounce up and down.
Stabilizers work by suspending the camera on a gimbal or pendulum that allows the camera to swing freely in any direction, thus helping it to remain parallel with the horizon.
The Zeadio Smartphone Stabilizer supports both single-hand mode and both-hand mode. Holding the handles with both hands (both-hand mode) can effectively reduce the camera shake when shooting video. You also have an ideal system for low-angle shooting.
You can put it on the ground or switch to single-hand mode to shoot low-angle video. It comes with 1 x shockproof carrying case with buckle, 2 x holder for Action camera, 1 x holder for smartphone and 1 x coldshoe adapter. All units can be stored in the attached carrying case, easy to carry and perfect for outdoor or travel shooting.
WeeBill-S is an advanced 3-axis gimbal designed for mirrorless and DSLR cameras. Equipped with the latest version of its motor units and algorithms, it delivers supreme power, superior compatibility and ease of operation for filmmakers.
WeeBill-S is lightweight and compact as a piece of A4 paper. The ergonomically designed Sling Mode makes it easy to shoot in any shooting angles and positions, including handheld, on tripods or on drones.
It supports mechanical focus/zoom control via the included cable and a servo motor. Even if your camera’s built-in lenses don’t have manual focus rings, you can pull focus or zoom precisely via the Sling Mode.
WeeBill-S comes with a tripod mount that allows you to choose between hand-held operation or mounting on tripods, monopods or any other equipment with a standard 1/4″ thread.
Newmowa mini camera tripod, double as a handheld grip and a stable base of support for use with Sony DSLR cameras to reduce camera shake and provide better pictures or videos.
Perfect for Photography Shooting, Macro Photography, Vlogging, Live Streaming, Instagram, Facebook, etc, leave a nice memory when you share happiness with your friends.
Newmowa Mini camera tripod is an ideal solution for photographers searching for a lightweight, portable and easy-to-use support system. The mini compact tripod stand is small enough to fit into your camera bag, backpack or even pocket, easy to carry around for your trip.
The mini camera tripod can double as a handheld grip and is designed to provide a sturdy base of support for use with Sony DSLR cameras to reduce camera shake and provide better pictures or videos.
It can also be used as selfie stick or handgrip holder. Perfect for Photography Shooting, Macro Photography, Vlogging (Video blogging), Live Streaming (video blogging),Instagram / Facebook / YouTube / Periscope / Snapchat / live-streaming / Mobile photography / Travel photography / Gopro hero 3 / Gopro hero 4 / Gopro hero 5 shooting/ Low light photography / night photography / Indoor photography.
This compact and lightweight DJI Ronin-SC gimbal stabilizer combine the best of lightweight, compact design with precision balancing so you can create smooth shots in tight spaces and at smaller sizes.
The gimbal is a 3-axis stabilized handheld camera gimbal with pan and tilt control for smooth camera movement.
It’s designed for mirrorless cameras and DSLRs weighing up to 4.4 lb (2 kg) and is compatible with a wide range of cameras including Sony Alpha, Canon M, and Panasonic Lumix series cameras. The Ronin-SC provides electronic focus control via compatible cameras, allowing you to seamlessly pull focus without touching the lens.
The DJI Ronin-SC provides three axes of stabilization: pan, tilt, and roll. Its motorized pan axis can move through a full 360° while the tilt axis has a -160 to +170° range of motion. The roll axis has a -70 to +70° range of motion.
Ronin-SC’s dynamic stability technology uses advanced algorithms to counteract external movements and maintain stable shots even when navigating through challenging scenarios.
Unobstructed Roll Axis Arm
The unobstructed roll axis arm prevents the camera cage from obstruct.
The DJI Ronin-SC is the smallest and most affordable handheld gimbal from DJI. It is designed for use with mirrorless cameras and smartphones and is ideal for capturing stabilized cinematic video, stills, and 3D 360 content.
Tilt the Roll Axis to create dynamic shots – Shoot smooth footage at up to 90 degree roll angle. The Pan Axis can be adjusted 360 degrees for unlimited panning possibilities. The Ronin-SC also has an unobstructed Roll Axis which allows filmmakers to capture dynamic, action-packed shots that are typically impossible with a traditional stabilizer.
Lightweight & Compact – Weighing in at only 2.4 lbs (1.1 kg), the DJI Ronin-SC is extremely portable and easy to carry anywhere, making it the perfect accessory for your next shoot. Also, with its foldable arms, you can neatly store it away when it’s not in use.
Dynamic Stability – With its three motorized axes, the DJI Ronin-SC delivers incredibly smooth footage while resisting vibration and movement in almost any situation. Whether you’re walking or running, the Ronin-SC keeps your camera level and stable as you move, allowing you to create professional looking videos every time.